คลิปหนีบแบตเตอรี่ตะกั่วสําหรับรถบรรทุก 12v
Description:
Support up to: 20000mAh Power bank at 600Amp Current (<3 seconds)
Strong Alligator Clamp Clip with EC5 Plug Connector (Fit for most car jump portable starters)
Usage of Car Jump Starter:
1. Connect the red battery clamp of jumper cable to the vehicles positive (+) battery and connect theblack to the negative pole.
2. Plug the cord of jumper cable into the jumper starters socket.
3. Start the vehicle.
Cautions:
1. Do not reverse the operation sequence of the jump starter.
2. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage.
3. Do remove the product from the vehicle within 30 seconds after the vehicle started or it may cause security incidents.
Specifications:
Input: 12V
Operating Temperature: 0°C-60°C
Color: Black+Red
Wire Gauge: 10 AWG; RED (+) 8 length; BLACK (-) 5 length
Clamp Size: 9.4x7.5x2.5cm/3.7x2.95x0.98
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Note: Due to the difference between different monitors the picture may not reflect the actual color of the item. Thank you!
No Retail Package
Package Contents:
1 x For Car Jump Starter Alligator Clamp
(5)
(4.2)